Installation-Maintenance

A. Begin the installation by attaching the two round clamps to the right and left bar of the Chaise Lounge. These clamps should be placed on the centerline of your hips when seated on the Lounge. Tighten the bolt # 1 with a 7/16” wrench or ratchet.

B. Place the Bimini on the ground behind the Chaise with the black bumpers down. Secure the Bimini to the clamps # 2. Install the acorn nut and Tighten with a 7/16 wrench or ratchet.

C. Open the Bimini and install the spreader bar. Raise the Bimini and estimate the location of the third clamp # 3 . From the side  the top will look like a triangle.  Install the third clamp on the right side  # 4 at the estimated location and secure with a 7/16” wrench or ratchet.

D. Attach the adjustment arm to the third clamp and secure with the wrench. Make any final adjustments to the clamp positions and secure all bolts.

E. Your are now ready to use your Skys The Limit Sun-Bimini Sun Shade. To adjust the position of  the top loosen the thumb screw and place top to desired position. When not in use lay the bimini flat and use the security strap to hold it down for storage.